The UK’s energy production and use landscape has shifted over several decades. Where once the country relied entirely on coal-fired electricity, it then expanded to include gas-fired power stations, then nuclear and now more renewable, eco-friendly sources are available.
During that time, electricity demand has increased enormously as the population grows and our modern lifestyles become more reliant on the power source.
Despite energy efficiency causing a drop in demand per person, which was approximately 4,200 kWh in 2025, country-wide electricity use is 5 to 6 times higher than in the 1950s.
While in the 1950s, power stations were almost entirely fueled by coal, the power generation mix has changed. Commercial nuclear power was introduced in the mid-twentieth century and grew to peak production in the late 1990s.
Although low-carbon compared to fossil fuels, nuclear power produces radioactive waste and byproducts that have to be disposed of safely.
With the 70th anniversary of the opening of Sellafield’s Calder Hall, we look at how titanates can be utilised in safe nuclear waste disposal and decommissioning.
What was the UK’s first nuclear power station?
Post-World War Two Britain was a pioneer in nuclear energy. From the atomic bomb programmes grew a nuclear power industry that saw the world’s first commercial nuclear power station built at Sellafield in West Cumbria.
Originally the site of plutonium production for military use, the engineers created a way to efficiently produce electricity on a commercial scale, and recycle and store used fuel and waste.
It was officially opened on 17 October 1956, and the site was initially home to two Windscale reactors (although later there were four reactors), chimneys, reprocessing and storage installations, plus other facilities, buildings and offices for staff.
The two-square-mile site hosted thousands of workers and operated 24 hours a day, every day of the year to produce electricity for the National Grid.
The Sellafield site was the start of Britain’s nuclear power production, and capacity expanded until it peaked in the 1990s. At that point, 26 Magnox reactors, 14 advanced gas-cooled reactors and Sizewell B’s pressurised water reactor were in operation.
By the mid-1990s, between them they produced approximately 25 per cent of the UK’s electricity. However, the reactors, chimneys, and surrounding installations came with risks, and over time the facilities reached the end of their lifespan.
Why was Sellafield power station closed?
Although no longer producing power from reactors, the Sellafield site is not completely closed. In 2003, Calder Hall and the Winscale reactors were closed, ending 47 years of electricity production at the site; however, the reprocessing of nuclear material continued.
The site continued to process used fuel from reactors in order to recycle the uranium and plutonium into a usable form. Oxide fuel processing stopped in 2018, and the Magnox (magnesium oxide-clad uranium fuel rods) processing ceased in 2022.
The site is currently undergoing a decommissioning programme, including removing and safely storing hazardous radioactive materials as part of an environmental clean-up.
The reason behind the cessation of operations is that a significant proportion of the buildings and infrastructure have been in operation since the 1950s or earlier. The facilities have reached the end of their lifespan, and many do not meet current safety standards.
How are titanates used in nuclear decommissioning?
Nuclear power production is now half of what it was a decade ago, and only four power stations, containing a total of nine reactors, are still operational.
With the closure of nuclear facilities for power generation and waste storage, it leaves them, like Sellafield, with a large clean-up job to make them safe. This is where toll-processed titanates can be of use.
There are two main ways titanates are used in safely managing nuclear waste: purifying radioactive water and capturing radioactive waste in ceramics.
Radioactive water
The process of purifying radioactive water involves ion exchange, where sodium titanates bind to strontium, plutonium or uranium. This way, the radioactive ions can be extracted from the water.
As water is used in cooling systems and is also one of the first environmental casualties of radioactive leaks, a process using granular sodium titanate or electrospun sodium titanates means the radioactive isotopes are exchanged for the benign sodium.
Another application is the use of lamina-shaped titanates, with a larger surface area, which can also be used to absorb radioactive iodine from water.
Ceramic capture
While previously radioactive waste was wrapped in borosilicate glass and concrete and then buried, capturing it in ceramic materials makes it more resistant to leaching and temperature changes.
Toll processed titanate minerals are used to create a synthetic rock or SYNROC ceramic composite. The crystalline atomic structures allow radioactive isotopes to be captured and locked into a solid form.